Comfort Company Acta-Embrace Back
$567.10
Contact BHC Rehab to Order 1.855.659.1270.
Comfort Company Acta-Embrace Backrest is a highly customizable backrest that can meet many needs. The integrated trunk supports are attached to a planar aluminum backrest shell and may be adjusted for angle, height, and up to a total of 3″ of width to create a custom supportive shape. The aluminum stays on the backside of the two layer foam pad can be molded to support lumbar, scoliosis, and kyphosis needs.
The Acta-Embrace features a patented custom moldable center section which allows precise contours for any spinal curvature. This offers increased support and comfort to accommodate lumbar, scoliosis, and kyphosis needs. The moldable stays can be removed – molded – replaced without having to remove the foam & cover from the backrest. All done while the user is seated. Moldable aluminum stays are offset from the center, removing pressure points from the spine and allowing for more aggressive molding to either side to support a rotated back.
COVER OPTIONS
STRETCH-AIR FABRIC
Designed for air transmission and heat reduction. This breathable laminate combines a high-stretch polyester top layer with a breathable vapor barrier.
COMFORT-TEK FABRIC
The fluid proof exterior has supple leathery properties that provide an easily cleaned surface and protection for the inner cushion. Comfort-Tek has multi-dimensional stretch and helps alleviate pressure on bony prominences.
COLORED FABRIC PIPING
The Comfort-Tek and Stretch-Air covers are available with one of six accent colors: Blue, Green, Silver, Red, Purple, or Pink. Accent colors can be applied to the cushion via colored piping. If no colors are selected, our standard silver reflective piping is used. Additional fee
CUSTOM OPTIONS
- PLANAR BACK STYLE: Integrated trunk supports are replaced with non-formed planar wings.
- VISCO FOAM: 1/2″ of x-soft, soft, or medium Visco foam can be added to the front of standard foam.
- 2-POINT HARDWARE: For persons with high tone, additional low brackets are used in conjunction with patented Compass Hardware.
Comfort Company Acta-Embrace Backrest is a highly customizable backrest that can meet many needs. The integrated trunk supports are attached to a planar aluminum backrest shell and may be adjusted for angle, height, and up to a total of 3″ of width to create a custom supportive shape. The aluminum stays on the backside of the two layer foam pad can be molded to support lumbar, scoliosis, and kyphosis needs.
The Acta-Embrace features a patented custom moldable center section which allows precise contours for any spinal curvature. This offers increased support and comfort to accommodate lumbar, scoliosis, and kyphosis needs. The moldable stays can be removed – molded – replaced without having to remove the foam & cover from the backrest. All done while the user is seated. Moldable aluminum stays are offset from the center, removing pressure points from the spine and allowing for more aggressive molding to either side to support a rotated back.
COVER OPTIONS
STRETCH-AIR FABRIC
Designed for air transmission and heat reduction. This breathable laminate combines a high-stretch polyester top layer with a breathable vapor barrier.
COMFORT-TEK FABRIC
The fluid proof exterior has supple leathery properties that provide an easily cleaned surface and protection for the inner cushion. Comfort-Tek has multi-dimensional stretch and helps alleviate pressure on bony prominences.
COLORED FABRIC PIPING
The Comfort-Tek and Stretch-Air covers are available with one of six accent colors: Blue, Green, Silver, Red, Purple, or Pink. Accent colors can be applied to the cushion via colored piping. If no colors are selected, our standard silver reflective piping is used. Additional fee
CUSTOM OPTIONS
- PLANAR BACK STYLE: Integrated trunk supports are replaced with non-formed planar wings.
- VISCO FOAM: 1/2″ of x-soft, soft, or medium Visco foam can be added to the front of standard foam.
- 2-POINT HARDWARE: For persons with high tone, additional low brackets are used in conjunction with patented Compass Hardware.
BT ID: BK-EFXXFC-YY, BK-EFXXSC-YY ( XX = Height | YY = Width)
Specifications
HCPCS: E2617
| Dimensions – Width | 10” – 24” |
| Dimensions – Height | 10” – 22” |
| Tool-less Assembly | NO |
| Warranty | Lifetime |
